35 File access denied: the file is in used by another program or file IO error!
38 At least one non-d-character is found in %1. Please use d-characters only.
40 At least one non-a-character is found in %1. Please use a-characters only.
41 Application Name
42 Abstract File Name
43 Bibliographic File Name
44 Copyright File Name
45 Data Preparer Name
46 Publisher Name
47 System Name
48 Volume Name
49 Volume Set Name
50 the string
51 Please enter at minimum of %1 character(s).
52 The number of levels in the directory hierarchy has been reached to the maximum of eight. Unable to add the directory %1.
53 %1
54 Used: %1 MB
55 Free: %1 MB
56 Please choose the menu File/Properties to rename the Volume Name.
57 Cannot rename %1: The specified filename already exists.
67 The maximum number of files and folders (2,147,483,647) is reached! Unable to add any more files or folders.\n
85 MS Sans Serif
87 Please insert a CD-RW disc.
89 A non FileCD-formatted disc is detected in the selected drive.\n\nWould you like to format the disc now?
91 No Volume Label
95 Incompatible format. The current disc cannot be used by FileCD. Please retry with another disc.
98 Unable to launch Internet\nThe Internet browser may not be installed.
100 You must open and close the tray (or eject and insert the caddy) before the changes will take effect to other applications.\nThe system will refresh the CD volume after the tray (or caddy) is ejected and closed.\n\nDo you want to do this now?
106 Insufficient free space on the disc.
107 modified on %s
109 This folder already contains a file named %s.
113 Insufficient memory to continue.
114 Save new added files to the CD in %1?
116 ExploreWClass
118 Exploring
119 Cannot find folder %1 in the folder tree.\nUnable to add the folder %2 into the folder tree.
307 The file name "%1" is invalid.\nA valid file name must be in 8.3 d-characters format: maximum 8 d-characters in name and 3 d-characters in extension.
309 Add folder and file
310 The file name "%1" is invalid.\nA valid file name must be in 8.3 format: maximum 8 characters in name and 3 characters in extension.
311 %1 seconds
344 The session in CD is incompatible with the current writing.
345 Cannot add session: the first track of the session is not a data track.
348 File Properties
349 Folder Properties
367 WINFILE.EXE
368 WFS_Frame
369 File Manager
372 Disc Properties
374 Untitled
375 Cannot add the file name "%1", which exceeds the maximum file name length of %2 characters.
378 WARNING: All data currently on the disc will be lost after formatting!!!\n\nAre you are sure that you want to format the disc?
380 Format was completed.
381 The disc is not formatted for FileCD. Please use Full format type.
382 Formatting disc...
383 Erasing disc...
384 Initializing file system...
385 Failed to format the disc.
386 Verifying disc...
387 Bad sectors found in System Reserved Area.\nCannot be used by FileCD.
388 The path table may be corrupted.
389 The folder '%1' may be corrupted.
390 New Folder
391 Verifying disc (%1 bad sectors found)...
552 Would you like to copy the selected files or folders to %1?
553 Copying file:
554 Moving file:
555 Copy Files
556 Move Files
557 Copying files to %1
558 Moving files to %1
563 Cannot delete %1: Cannot find the specified filename. Make sure the correct filename is specified.
565 Failed to launch the Explorer; error code = %1.
583 Cannot create or replace %1: There is not enough free disk space.\nDelete one or more files to free disk space, and then try again.
605 File Folder
606 File
627 disc
628 Name
629 Size
630 Type
631 Modified
632 From '%1' to '%2'
633 A filename cannot contain any of the following characters:\n\/:*?"<>|
634 No FileCD-formatted CD-RW disc is detected in the selected drive.\nPlease insert a FileCD-formatted CD-RW disc to the drive and try again,\nor use Format command under Disc menu to format one.
750 Insufficient free space in the hard disk in which "Directory for Program Cache Buffer" is set. Please choose Options under Tools menu to select another hard disk with enough free space for "Program Cache Buffer".
751 The operation completed successfully.
752 The file already exists.
753 There is a duplicate copy.
754 The session was not opened.
755 Exceed CD size of the demo version.
756 Exceed the maximum directory level of ISO 9660.
757 Failed to open file.
758 Failed to read file.
759 Failed to write file.
760 Invalid PVD.
761 The directory cannot be found.
762 Failed to open a device.
763 Device IO error.
765 Time out.
766 The file not exists.
767 Failed to lock memory.
768 Array index is out of bound.
769 Invalid pointer.
770 Internal error while preparing TOC.
771 SRB being processed.
772 SRB aborted.
773 Unable to abort SRB.
774 Service Request Block (ASPI command) completed with error.
775 ASPI time out.
776 Invalid ASPI command.
777 Invalid host adapter number.
778 Device not installed.
779 Invalid parameter set in SRB.
780 ASPI for windows failed init.
781 No resources available to execute command.\nPlease close the other applications (e.g. CD Player) and try again.
782 Buffer size to big to handle!
783 ASPI for windows failed.
784 Invalid parameter for an API function.
785 User cancelled.
786 Compression error.
787 Decompression error.
788 Two files are not the same.
789 User abort.
790 User skip.
791 Invalid Wave file.
792 Specified chunk not found.
793 Invalid format for CDDA recording.
794 Invalid .cda file.
795 Invalid video file.
796 Invalid video track.
797 Track size less than 300 blocks is too small.
798 Path Table is too big for memory allocation.
799 Two tracks are not compared.
800 LBA out of order.
801 Error in creating tree nodes.
802 Invalid mode for operation.
803 Invalid block size.
804 CD format not supported.
805 Cannot find the CD drive.
806 The source format is not supported.
807 Invalid Start Code in MPEG file.
808 Invalid Stream ID in MPEG file.
809 Failed to open audio recording device.
810 Unknown error.
811 CD drive is not ready.
812 Medium error.
813 Hardware error.
814 Illegal request.
815 Unit attention.
816 Blank check.
817 Vendor specific error.
818 Aborted command.
819 Volume overflow error.
820 Miscompare error.
821 Data buffer under run error or invalid logical block address (LBA).
822 The CD is incompatible with the current writing.
823 CD writing error.\nPlease retry with the following options:\n(1) Clean up the disc surface.\n(2) Use another disc.
824 Medium not present.
825 CD read error.
826 Medium changed.
827 Insufficient free space on the target.
828 The disc is already full.
829 Error code = %1.
830 API functions calling out of sequence.
831 A string is too long to fit into a buffer.
832 Invalid License ID.
833 Source and target drives are the same.
834 CD drive is not ready.
835 Failed to select all files. Please reduce the number of selected files and try again.
836 Failed to load the file system from the disc.\nIf you want to use this disc with FileCD, you need to reformat it.\nWould you like to format this disc now?
837 To read back the disc in UDF format,\nexcept under Windows 2000 and Windows XP,\nyou need to have UDF reader driver software installed in your system.\nWould you like to continue?
32771 Open the application\nOpen
32772 Create a new folder\nNew folder
32773 Deletes the selected items\nDelete
32774 Renames the selected item\nRename
32775 Refresh item information\nRefresh
32776 Reverses which items are selected and which are not\nInvert
32777 Displays the properties of the selected items\nProperties
32779 Eject disc\nEject
32780 Launch the Windows Explorer\nWindows Explorer
32781 Re-scan the IDE and SCSI buses for CD-Recorders\nRescan CD-Recorders
32782 Format disc\nFormat
32783 Quit the application\nExit
32784 Add files to disc\nAdd
32785 Change disc settings\nOptions
57344 FileCD
57345 Ready
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Hide the application\nExit
57667 List Help topics\nHelp Topics
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59143 ISO 9660
59144 Used: 9,999 MB
59145 Free: 9,999 MB
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
59397 Arrange icons on a grid.
59408 Display items by using small icons.\nSmall Icons
59409 Display items by using large icons.\nLarge Icons
59410 Displays items in a list.\nList
59411 Displays detailed information about each item in the window.\nDetails
59412 Arranges icons in a grid.
59413 Sorts the icons alphabetically.
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
